| Specification |
Details |
| Model |
IC695PNC001 |
| Series |
RX3i PACSystems |
| Type |
PROFINET Controller Module |
| PROFINET Support |
Version 2.2 General Class A IO-Controller |
| Communication Ports |
2 RJ-45 (10/100/1000 Mbps copper), 2 SFP cages (SFP modules sold separately), 1 micro USB (diagnostic only) |
| Supported Media |
10/100/1000 Mbps Copper, 100/1000 Mbps Multi-mode Fiber, 100/1000 Mbps Single-mode Fiber |
| Network Topologies |
Star, Ring, Daisy-chain/Line |
| I/O Device Capacity |
Up to 64 devices per controller, 128 I/O devices per network (across up to 8 controllers) |
| I/O Points |
Up to 2048 I/O devices or 128 per network |
| I/O Update Rate |
Configurable: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ms |
| Internal Power |
3.3 VDC: 0.5 A (no SFP), 1.2 A max (with 2 SFPs, 0.35 A per SFP); 5 VDC: 1.5 A max |
| CPU Compatibility |
RX3i CPU315 or CPU320 with firmware version 7.0 or higher |
| Max Modules per System |
Up to 4 IC695PNC001 modules per CPU, main rack only |
| Backplane Support |
Universal backplane only (PCI bus) |
| Diagnostics |
Advanced network health monitoring, time-stamped diagnostics synced with RX3i CPU |
| LED Indicators |
OK, LAN, ACTIVE, STATUS, CONFIG, port-specific LEDs |
| Firmware Updates |
Via WinLoader utility |
| Configuration |
Proficy Machine Edition, built-in Command Line Interface (via micro USB or Telnet) |
| Operating Temperature |
0°C to +60°C (32°F to +140°F), lower with SFPs |
| Storage Temperature |
-40°C to +85°C (-40°F to +185°F) |
| Relative Humidity |
5% to 95% (non-condensing) |
| Weight |
0.57 kg (1.25 lbs) |
| Dimensions |
13.3 x 5.1 x 13.5 cm (5.24 x 2.0 x 5.31 in) |
| Mounting |
Single slot in RX3i universal backplane |
| Certifications |
CE, UL, CSA, Class I Div 2 |
| Redundancy |
Media Redundancy Protocol (MRP) with compatible CPUs |
