Product Description
Product Parameters for P0916RH (FBM219 Discrete I/O Interface Module)
📘 Product Overview
| Field | Details |
|---|---|
| Manufacturer | Foxboro (by Schneider Electric, formerly Invensys) |
| Part Number | P0916RH |
| Product Type | Discrete I/O Interface Module (FBM219) |
| Function | Provides 24 discrete input channels and 8 discrete output channels for process automation |
| System Compatibility | Foxboro I/A Series, 200 Series FBM Subsystem, supports 100 Series FBM upgrades |
⚙️ Functional Specifications
| Feature | Specification |
|---|---|
| Input Channels | 24 group-isolated discrete input channels |
| Output Channels | 8 group-isolated discrete output channels |
| Supported Signal Types | |
| - Input Signals | Voltage monitor or contact sense: 15 to 60 V dc, 120 V ac/125 V dc, 240 V ac |
| - Output Signals | Switch (external/internal source): 30 V dc at 0.25 A or 5 A, 125 V dc at 0.6 A, 120 V ac at 5 A, 240 V ac at 5 A |
| Input Voltage Ranges | |
| - Low Voltage (dc) | On-state: 15 to 30 V dc; Off-state: 0 to 5 V dc; Current: 2.2 mA typical at 30 V dc |
| - High Voltage | 132 V ac or 150 V dc max; Logic Zero: 0 to 20 V ac/dc; Logic One: 79 to 132 V ac or 75 to 150 V dc; Current: 2.2 mA typical |
| - Contact Sense (Internal) | 24 V dc ±10% open circuit voltage; 2.5 mA max short circuit current; 7 mA nominal current limit for TA P0917LH |
| - Voltage Monitor (Specific) | 130 V dc max (FBM07A), 264 V ac max (FBM20), 150 V dc max (FBM24A/C) |
| Output Voltage/Current | |
| - Low Voltage (dc) | 60 V dc max; 0.25 A max current; 0.25 mA max off-state leakage; 0.4 A over-current fuse (TA P0917LE/LH) |
| - High Voltage (Relay) | ≤30 V dc or ≤250 V ac; 5 A max per channel; 12 A max total per TA; SPDT (Form C) relay (TA P0917LL/LV) |
| - Expansion TA Outputs | Up to 264 V ac or 150 V dc; 0.5 A to 2.25 A max current per channel; 7 A to 12 A max per TA |
| Filter/Debounce Time | Configurable: No filtering, 4, 8, 16, or 32 ms (for firmware version 1.25H or later) |
| Isolation | Group isolation: 600 V ac for 1 minute between channel and ground or between input/output channels; Channel isolation for TAs P0917LL (input), P0917LP (input), P0917LS (output): 600 V ac between channels and ground |
| Program Execution | Executes Discrete I/O or Ladder Logic program with configurable options: Input Filter Time, Fail-Safe Configuration, Fail-Safe Fall-Back, Sustained or Momentary Outputs |
| Communication | Via redundant 2 Mbps Module Fieldbus; communicates with Fieldbus Communications Module (FCM) or Control Processor (FCP); supports automatic failover between A/B paths |
| Power Requirements | Input: 24 V dc (+5%, -10%); Consumption: 5 W max; Heat Dissipation: 6 W max |
| Loop Power Protection | Current limited to 2.5 mA for inputs |
| Calibration | No calibration required for module or termination assembly |
🔌 Physical Specifications
| Feature | Specification |
|---|---|
| Material | Module: Extruded aluminum; TA: Polypropylene (PVC) or Polyamide (PA) |
| Mass | Module: 284 g (10 oz); TA (Compression): 420 g (0.93 lb) for 216 mm, 480 g (1.1 lb) for 267 mm, 908 g (2.0 lb) for 286 mm |
| Dimensions (Module) | Height: 102 mm (4 in), 114 mm (4.5 in) with lugs; Width: 45 mm (1.75 in); Depth: 104 mm (4.11 in) |
| Dimensions (TA) | Varies by TA; e.g., P0917LL/LE/LH/LP/LV: Width 267 mm (10.52 in), Height 125 mm (4.92 in); P0917LS: Width 286 mm (11.25 in) |
| Mounting | Module: DIN rail baseplate (horizontal/vertical) or 19-inch rack; TA: DIN rail (32 mm or 35 mm) |
| Cable Connections | Baseplate to TA: 37-pin D-subminiature; TA to field: Compression (0.2 to 4 mm², 24 to 12 AWG) or Ring-lug (#6, 0.5 to 4 mm²) |
| Cable Types | Type 4/4H (Baseplate to Main TA): P/PVC, LSZH, or H/XLPE; Type 6 (Main to Expansion TA): P/PVC, LSZH, or H/XLPE; Lengths up to 30 m (98 ft) |
| Visual Indicators | LEDs for module status and individual input/output states |
🌡️ Environmental Specifications
| Parameter | Specification |
|---|---|
| Operating Temperature | Module: -20 to +70°C (-4 to +158°F); TA (PVC): -20 to +50°C (-4 to +122°F); TA (PA): -20 to +70°C |
| Storage Temperature | -40 to +70°C (-40 to +158°F) |
| Relative Humidity | 5 to 95% (non-condensing) |
| Operating Altitude | -300 to +3,000 m (-1,000 to +10,000 ft) |
| Storage Altitude | -300 to +12,000 m (-1,000 to +40,000 ft) |
| Contamination | Class G3 (Harsh) per ISA S71.04; EIA Standard 364-65, Class III |
| Vibration | 0.75 m/s² (5 to 500 Hz) |
✅ Regulatory Compliance
| Standard | Details |
|---|---|
| Electromagnetic Compatibility (EMC) | Meets European EMC Directive 2004/108/EC; EN 50081-2 (Emission), EN 50082-2 (Immunity), EN 61326 (Industrial Levels), CISPR 11 (Class A); IEC 61000-4-2 (ESD: 4 kV contact, 8 kV air), IEC 61000-4-3 (Radiated: 10 V/m), IEC 61000-4-4 (EFT: 2 kV), IEC 61000-4-5 (Surge: 2 kV power, 1 kV I/O), IEC 61000-4-6 (Conducted: 3 V rms), IEC 61000-4-8 (Magnetic: 30 A/m) |
| Product Safety | UL/UL-C listed for Class I, Groups A-D, Division 2, T4; Class 2 per NFPA 70 and CSA C22.1; CENELEC (DEMKO) certified for Zone 2, Group IIC; meets European Low Voltage Directive 2006/95/EC and ATEX Directive 94/9/EC |
| Certifications (TA) | Type 1: UL/UL-C (Class I, Div 2, T4), CENELEC EEx nA IIC T4 (Zone 2); Type 2: Non-incendive field circuits (Class I, Div 2); Type 4: NEC/CEC Class 2; Type 5: Ordinary locations |
📦 Ordering Information
| Field | Details |
|---|---|
| Part Number | P0916RH (FBM219 Module) |
| Associated TAs | Main TAs: P0917LL, P0917LE, P0917LH, P0917LV, P0924HA/HC/HF/HN, etc.; Expansion TAs for 100 Series upgrades: P0924HP, P0924HQ, etc. (see Pages 9-20) |
| Cables | Type 4/4H (Baseplate to Main TA): P0916FG to P0916FQ (P/PVC), P0928BA to P0928BK (LSZH); Type 6 (Main to Expansion TA): P0924CK (P/PVC), P0928CQ (LSZH) |
| Relay Specifications | Part P0165CL: SPDT, 5 A at 30 V dc/240 V ac, 0.6 A at 125 V dc; 1200 VA/150 W max switching capacity; 100,000 operations at rated load |