Product Description
| Model Description | |
|---|---|
| Field | Details |
| Model | VE4003S2B1 |
| Description | Analog Input Card, 8 Channels, 4-20 mA, HART. Includes Standard I/O Termination Block. |
| Technical Specifications | |
|---|---|
| Parameter | Specification |
| Number of Channels | 8 |
| Isolation | Each channel is optically isolated from the system and factory tested to 1500 V DC. |
| Nominal Signal Range (Span) | 4 to 20 mA |
| Full Signal Range | 1 to 22.5 mA, with over range checking |
| LocalBus Current (12V DC nominal) | Simplex: 120 mA typical, 150 mA maximum<br>Redundant: 175 mA typical, 250 mA maximum (per card) |
| Field Circuit Power | 300 mA maximum at 24V DC (±10%) |
| Accuracy Over Temperature Range | 0.1% of span |
| Resolution | 16-bit A/D converter |
| Repeatability | 0.05% of span |
| Roll-off Frequency | -3 dB at 2.7 Hz, -20.5 dB at 1/2 the sampling frequency |
| Calibration | None required |
| Optional Fuse | 2.0 A |
| Communications Support | HART pass-through for AMS Device Manager. Field device variable and status reporting for control functions. |
| HART Scan Time | 600-800 ms (typical) per enabled channel |
| Compatibility | |
|---|---|
| Component | Specification |
| I/O Card Keying | A1 |
| Conventional I/O Terminal Block | Standard I/O Termination Block<br>Fused I/O Termination Block<br>4-wire I/O Termination Block |
| Mass Termination Block | 16-pin Mass Termination Block (Supports 2-wire Devices)<br>24-pin Mass Termination Block (Supports 4-wire Devices) |
| Certifications | |
|---|---|
| Certification Type | Details |
| FM (USA) | Class I, Division 2, Groups A, B, C, D, T4 |
| cFM (Canada) | Class I, Division 2, Groups A, B, C, D, T4 |
| ATEX | II 3G Ex ec IIC T4 Gc<br>II 3G Ex nA nC IIC T4 Gc |
| IEC-Ex | Ex ec IIC T4 Gc<br>Ex nA nC IIC T4 Gc |
| Zone 2 Ex nA Certified | Yes |
| Zone 2 Ex nL / Ex ic | No |
| Class I Division II Non-Incendive | No |
| Additional Information | |
|---|---|
| Field | Details |
| System Compatibility | M-series Traditional I/O cards are not physically compatible with S-series controller carriers. Requires MQ, MX, or PK controllers and M-series horizontal or VerticalPlus carriers. Supported on DeltaV v10.3.1 and later. |
| Ordering Information | VE4003S2B1 includes Standard I/O Termination Block. |
| Installation Instructions | Refer to:<br>• Class 1 Division 2 Installation Instructions DeltaV M-Series 12P1293<br>• Zone 2 Installation Instructions DeltaV M-Series 12P2046 |
| Reference Documents | |
|---|---|
| Document | Description |
| PDS M-series Mass Connection Solution | For further details on the Mass Connection Boards |
| Installation Standards | Ensure compliance with standards and certifications detailed in installation documentation. |