Emerson EPRO CON021+PR6423/10R-030 Eddy Current Converter with 8mm Sensor
Emerson EPRO CON021+PR6423/10R-030 Eddy Current Converter with 8mm Sensor
Manufacturer: Emerson
Product No.: CON021+PR6423/10R-030
Condition:1000 in stock
Product Type: Eddy Current Signal Converter with Sensor
Product Origin: 8502345678901
Payment: T/T, Western Union
Weight: 120g
Shipping port: Xiamen
Warranty: 12 months
- 24/7 Support
- 30-Day Returns
- Fast Shipping
⚡ Emerson EPRO CON021 + PR6423/10R-030 Eddy Current Signal Converter
The Emerson EPRO CON021 paired with the PR6423/10R-030 8mm eddy current sensor delivers precision vibration and displacement monitoring for rotating machinery. This integrated solution converts analog sensor signals into standardized outputs for seamless integration with DCS, PLC, and condition monitoring systems across critical industrial assets.
🔍 Core Technical Parameters
- Converter Model: CON021 signal conditioner
- Sensor Model: PR6423/10R-030 (8mm probe diameter)
- Measurement Range: 0-2mm typical displacement
- Frequency Response: 0-10 kHz (-3dB)
- Output Signal: 4-20mA / 0-10VDC selectable
- Power Supply: 24VDC ±10%, <5W consumption
- Operating Temp: -40°C to +85°C (-40°F to +185°F)
- Sensor Cable Length: 3m standard (custom lengths available)
- Protection Rating: IP65 (sensor), IP20 (converter)
- Compatibility: PR6422, PR6424, PR6426, PR6453 series sensors
🏗️ Industrial Application Scenarios
Turbomachinery Monitoring: Track shaft displacement, radial vibration, and axial position in steam turbines, gas turbines, and compressors to prevent catastrophic bearing failures and rotor rubs.
Pump & Motor Diagnostics: Detect misalignment, imbalance, and bearing wear in centrifugal pumps, cooling water systems, and high-speed motors before unplanned downtime occurs.
Generator Protection: Monitor rotor eccentricity and vibration in hydroelectric, wind, and thermal power generators, triggering alarms when thresholds are exceeded.
Petrochemical Rotating Equipment: Continuous surveillance of compressors, blowers, and agitators in refineries, chemical plants, and offshore platforms where reliability is mission-critical.
💼 Engineered Solutions & Value Proposition
🎯 Plug-and-Play Integration: Factory-calibrated sensor-converter pairs eliminate field calibration, reducing commissioning time by up to 60% compared to legacy systems.
🎯 Dual Output Flexibility: Simultaneous 4-20mA and voltage outputs enable connection to both legacy DCS and modern SCADA platforms without signal splitters.
🎯 Extended Temperature Range: Operates reliably in extreme environments from Arctic installations to desert refineries, maintaining ±0.5% accuracy across the full temperature span.
🎯 Predictive Maintenance Ready: High-frequency response captures early-stage fault signatures (gear mesh frequencies, blade pass harmonics) that low-bandwidth systems miss.
🎯 Retrofit Compatible: Direct replacement for Bently Nevada 3300 XL, Metrix 5500, and legacy EPRO systems with minimal wiring changes.
🔧 System Architecture & Deployment
The CON021 converter mounts in control cabinets or junction boxes, while the PR6423 sensor installs via M18x1 threaded mounting or clamp brackets. Typical installations position sensors 90° apart for X-Y vibration analysis or at thrust collar faces for axial float measurement. The system integrates with EPRO Condition Monitoring Systems, OSI PI historians, and third-party vibration analyzers via Modbus RTU or analog I/O.
📋 Package Contents
- 1x CON021 Eddy Current Signal Converter
- 1x PR6423/10R-030 8mm Eddy Current Sensor (3m cable)
- Mounting hardware and installation template
- Calibration certificate and technical datasheet
- Quick-start guide with wiring diagrams
Engineered for industries where uptime is non-negotiable, the EPRO CON021+PR6423 system provides the accuracy, reliability, and diagnostic insight needed to transition from reactive maintenance to predictive asset management.
Product Description
⚡ Emerson EPRO CON021 + PR6423/10R-030 Eddy Current Signal Converter
The Emerson EPRO CON021 paired with the PR6423/10R-030 8mm eddy current sensor delivers precision vibration and displacement monitoring for rotating machinery. This integrated solution converts analog sensor signals into standardized outputs for seamless integration with DCS, PLC, and condition monitoring systems across critical industrial assets.
🔍 Core Technical Parameters
- Converter Model: CON021 signal conditioner
- Sensor Model: PR6423/10R-030 (8mm probe diameter)
- Measurement Range: 0-2mm typical displacement
- Frequency Response: 0-10 kHz (-3dB)
- Output Signal: 4-20mA / 0-10VDC selectable
- Power Supply: 24VDC ±10%, <5W consumption
- Operating Temp: -40°C to +85°C (-40°F to +185°F)
- Sensor Cable Length: 3m standard (custom lengths available)
- Protection Rating: IP65 (sensor), IP20 (converter)
- Compatibility: PR6422, PR6424, PR6426, PR6453 series sensors
🏗️ Industrial Application Scenarios
Turbomachinery Monitoring: Track shaft displacement, radial vibration, and axial position in steam turbines, gas turbines, and compressors to prevent catastrophic bearing failures and rotor rubs.
Pump & Motor Diagnostics: Detect misalignment, imbalance, and bearing wear in centrifugal pumps, cooling water systems, and high-speed motors before unplanned downtime occurs.
Generator Protection: Monitor rotor eccentricity and vibration in hydroelectric, wind, and thermal power generators, triggering alarms when thresholds are exceeded.
Petrochemical Rotating Equipment: Continuous surveillance of compressors, blowers, and agitators in refineries, chemical plants, and offshore platforms where reliability is mission-critical.
💼 Engineered Solutions & Value Proposition
🎯 Plug-and-Play Integration: Factory-calibrated sensor-converter pairs eliminate field calibration, reducing commissioning time by up to 60% compared to legacy systems.
🎯 Dual Output Flexibility: Simultaneous 4-20mA and voltage outputs enable connection to both legacy DCS and modern SCADA platforms without signal splitters.
🎯 Extended Temperature Range: Operates reliably in extreme environments from Arctic installations to desert refineries, maintaining ±0.5% accuracy across the full temperature span.
🎯 Predictive Maintenance Ready: High-frequency response captures early-stage fault signatures (gear mesh frequencies, blade pass harmonics) that low-bandwidth systems miss.
🎯 Retrofit Compatible: Direct replacement for Bently Nevada 3300 XL, Metrix 5500, and legacy EPRO systems with minimal wiring changes.
🔧 System Architecture & Deployment
The CON021 converter mounts in control cabinets or junction boxes, while the PR6423 sensor installs via M18x1 threaded mounting or clamp brackets. Typical installations position sensors 90° apart for X-Y vibration analysis or at thrust collar faces for axial float measurement. The system integrates with EPRO Condition Monitoring Systems, OSI PI historians, and third-party vibration analyzers via Modbus RTU or analog I/O.
📋 Package Contents
- 1x CON021 Eddy Current Signal Converter
- 1x PR6423/10R-030 8mm Eddy Current Sensor (3m cable)
- Mounting hardware and installation template
- Calibration certificate and technical datasheet
- Quick-start guide with wiring diagrams
Engineered for industries where uptime is non-negotiable, the EPRO CON021+PR6423 system provides the accuracy, reliability, and diagnostic insight needed to transition from reactive maintenance to predictive asset management.