Bently Nevada 3300/12-01-20-01 Proximity Transducer
Bently Nevada 3300/12-01-20-01 Proximity Transducer
Manufacturer: Bently Nevada
Product No.: 3300/12-01-20-01
Condition:1000 in stock
Product Type: Proximity Sensors
Product Origin: 00330012012001
Payment: T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months
- 24/7 Support
- 30-Day Returns
- Fast Shipping
Bently Nevada 3300/12-01-20-01 Proximity Transducer System
The Bently Nevada 3300/12-01-20-01 is a precision proximity transducer designed for non-contact measurement of shaft displacement and vibration in rotating machinery. This industrial-grade sensor delivers reliable performance in turbines, compressors, and motors, enabling predictive maintenance programs that prevent costly equipment failures.
Key Features
- ✅ Non-Contact Measurement – Eddy current technology monitors shaft without physical contact
- ✅ High Precision – Accurate displacement measurement for critical machinery
- ✅ Wide Temperature Range – Operates from -40°C to +177°C
- ✅ Industrial Durability – Stainless steel construction for harsh environments
- ✅ API 670 Compliant – Meets machinery protection system standards
Technical Specifications
| Part Number | 3300/12-01-20-01 |
| Product Type | Proximity Transducer System |
| Measurement Type | Eddy current proximity |
| Frequency Response | DC to 10 kHz |
| Operating Temp | -40°C to +177°C |
| Housing Material | Stainless steel |
| Certifications | API 670, CE, UL |
| Weight | Approx. 200g |
Industrial Applications
Turbomachinery Monitoring
Monitor bearing clearance and rotor vibration in steam turbines, gas turbines, and centrifugal compressors. Detect faults before catastrophic failure.
Large Motors & Generators
Track shaft position and vibration in electric motors above 1,000 HP. Prevent bearing failures in critical power generation equipment.
Process Equipment
Measure shaft displacement in pumps, fans, and compressors. Enable condition-based maintenance strategies.
Installation Guidelines
- Gap Setting – Install with 1.0-1.5mm gap to shaft surface
- Alignment – Ensure perpendicular alignment to shaft (±5° tolerance)
- Target Surface – Use smooth, clean shaft surface
- Cable Routing – Avoid sharp bends and power lines
- Grounding – Ground shield at one end only
Authenticity Guarantee
⚠️ Counterfeit Sensor Risks
Non-genuine sensors can cause:
- ❌ Inaccurate measurements
- ❌ Premature failure
- ❌ API 670 non-compliance
- ❌ Voided certifications
✅ Industrial Control Hub Guarantee
- 🔒 100% Genuine Bently Nevada – Factory-sealed
- 📜 Calibration Certificate – Included
- 🌍 Authorized Distributor – Verified
- 🛡️ 24-Month Warranty – Global coverage
Package Contents
- 1× Bently Nevada 3300/12-01-20-01 proximity transducer
- Installation hardware
- Calibration certificate
- Product documentation
Technical Support
- 📧 Application Engineering – Sensor selection guidance
- 📚 Documentation – Installation manuals and API 670 guides
- 🔧 Commissioning Support – Remote setup assistance
- 🔄 30-Day Returns – Unused sensors in original packaging
FAQ
Q: What is the difference between proximity transducers and accelerometers?
A: Proximity transducers measure shaft displacement (position), while accelerometers measure vibration. Both are complementary.
Q: Can I use this with non-steel shafts?
A: Requires conductive target material (steel, stainless steel, Inconel). Not compatible with ceramic or composite.
Q: How often should I recalibrate?
A: API 670 recommends recalibration every 5 years or after cable replacement.
Product Description
Bently Nevada 3300/12-01-20-01 Proximity Transducer System
The Bently Nevada 3300/12-01-20-01 is a precision proximity transducer designed for non-contact measurement of shaft displacement and vibration in rotating machinery. This industrial-grade sensor delivers reliable performance in turbines, compressors, and motors, enabling predictive maintenance programs that prevent costly equipment failures.
Key Features
- ✅ Non-Contact Measurement – Eddy current technology monitors shaft without physical contact
- ✅ High Precision – Accurate displacement measurement for critical machinery
- ✅ Wide Temperature Range – Operates from -40°C to +177°C
- ✅ Industrial Durability – Stainless steel construction for harsh environments
- ✅ API 670 Compliant – Meets machinery protection system standards
Technical Specifications
| Part Number | 3300/12-01-20-01 |
| Product Type | Proximity Transducer System |
| Measurement Type | Eddy current proximity |
| Frequency Response | DC to 10 kHz |
| Operating Temp | -40°C to +177°C |
| Housing Material | Stainless steel |
| Certifications | API 670, CE, UL |
| Weight | Approx. 200g |
Industrial Applications
Turbomachinery Monitoring
Monitor bearing clearance and rotor vibration in steam turbines, gas turbines, and centrifugal compressors. Detect faults before catastrophic failure.
Large Motors & Generators
Track shaft position and vibration in electric motors above 1,000 HP. Prevent bearing failures in critical power generation equipment.
Process Equipment
Measure shaft displacement in pumps, fans, and compressors. Enable condition-based maintenance strategies.
Installation Guidelines
- Gap Setting – Install with 1.0-1.5mm gap to shaft surface
- Alignment – Ensure perpendicular alignment to shaft (±5° tolerance)
- Target Surface – Use smooth, clean shaft surface
- Cable Routing – Avoid sharp bends and power lines
- Grounding – Ground shield at one end only
Authenticity Guarantee
⚠️ Counterfeit Sensor Risks
Non-genuine sensors can cause:
- ❌ Inaccurate measurements
- ❌ Premature failure
- ❌ API 670 non-compliance
- ❌ Voided certifications
✅ Industrial Control Hub Guarantee
- 🔒 100% Genuine Bently Nevada – Factory-sealed
- 📜 Calibration Certificate – Included
- 🌍 Authorized Distributor – Verified
- 🛡️ 24-Month Warranty – Global coverage
Package Contents
- 1× Bently Nevada 3300/12-01-20-01 proximity transducer
- Installation hardware
- Calibration certificate
- Product documentation
Technical Support
- 📧 Application Engineering – Sensor selection guidance
- 📚 Documentation – Installation manuals and API 670 guides
- 🔧 Commissioning Support – Remote setup assistance
- 🔄 30-Day Returns – Unused sensors in original packaging
FAQ
Q: What is the difference between proximity transducers and accelerometers?
A: Proximity transducers measure shaft displacement (position), while accelerometers measure vibration. Both are complementary.
Q: Can I use this with non-steel shafts?
A: Requires conductive target material (steel, stainless steel, Inconel). Not compatible with ceramic or composite.
Q: How often should I recalibrate?
A: API 670 recommends recalibration every 5 years or after cable replacement.