Bently Nevada 19000-00-90-12-02 Vibration Monitor
Bently Nevada 19000-00-90-12-02 Vibration Monitor
Manufacturer: Bently Nevada
Product No.: 19000-00-90-12-02
Condition:1000 in stock
Product Type: Vibration Monitors
Product Origin: 0019000009012
Payment: T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months
- 24/7 Support
- 30-Day Returns
- Fast Shipping
Bently Nevada 19000-00-90-12-02 Vibration Monitor
The Bently Nevada 19000-00-90-12-02 is a precision vibration monitoring system designed for continuous machinery health surveillance in turbines, compressors, motors, and generators. This industrial-grade monitor provides real-time vibration analysis with programmable alarms, preventing catastrophic failures and extending equipment life in power generation, oil & gas, and manufacturing facilities.
Key Features
- ✅ Real-Time Monitoring – Continuous vibration surveillance for critical machinery
- ✅ Programmable Alarms – Configurable alert and danger setpoints for machinery protection
- ✅ 4-20mA Output – Industry-standard analog output for DCS/PLC integration
- ✅ Wide Frequency Range – Captures low-frequency and high-frequency vibration events
- ✅ API 670 Compliant – Meets machinery protection system standards
- ✅ Relay Outputs – Alarm contacts for machinery shutdown systems
Technical Specifications
| Part Number | 19000-00-90-12-02 |
| Product Type | Vibration Monitor |
| Input Type | Proximity probes, accelerometers, velocity sensors |
| Output Signal | 4-20mA (isolated) |
| Alarm Relays | 2 per channel (Alert, Danger) |
| Power Supply | 24V DC (18-30V range) |
| Operating Temp | -30°C to +65°C |
| Mounting | DIN rail or panel mount |
| Certifications | API 670, CE, UL, CSA |
| Weight | 0.2 kg |
Industrial Applications
Steam & Gas Turbines
Monitor bearing vibration in power generation turbines. Programmable alarms enable early detection of unbalance, misalignment, and bearing wear.
Compressor Trains
Track vibration in centrifugal compressors. API 670 compliance ensures machinery protection system certification for oil & gas facilities.
Large Motors & Generators
Measure vibration in electric motors above 1,000 HP. Early fault detection prevents catastrophic bearing failures and rotor damage.
Pumps & Fans
Monitor vibration in critical process pumps and induced draft fans. Reduce unplanned maintenance and extend equipment life.
Installation & Configuration
Mounting Options
- DIN Rail Mount – Snap module onto standard 35mm DIN rail in control cabinet
- Panel Mount – Use mounting brackets for direct panel installation
Configuration Steps
- Connect proximity probes or accelerometers to input terminals
- Set measurement range using DIP switches or software configuration
- Program alarm setpoints (Alert and Danger levels)
- Connect 4-20mA output to DCS/PLC analog input
- Wire relay contacts to machinery shutdown system
- Apply 24V DC power and verify LED indicators
- Calibrate using known vibration source or signal generator
Authenticity Guarantee
⚠️ Counterfeit Monitor Risks
Non-genuine vibration monitors can cause:
- ❌ Inaccurate vibration readings leading to missed faults
- ❌ False alarms causing unnecessary shutdowns
- ❌ Non-compliance with API 670 standards
- ❌ Voided machinery protection system certifications
✅ Industrial Control Hub Guarantee
- 🔒 100% Genuine Bently Nevada – Factory-sealed packaging
- 📜 Full Traceability – Serial numbers and certificates
- 🌍 Authorized Distributor – Verify at Baker Hughes partner portal
- 🛡️ 24-Month Warranty – Manufacturer warranty honored globally
Package Contents
- 1× Bently Nevada 19000-00-90-12-02 vibration monitor
- Installation manual and configuration guide
- Mounting hardware (DIN rail clips or panel brackets)
- Terminal block connectors
Technical Support
- 📧 Application Engineering – Email us for sensor selection and alarm setpoint recommendations
- 📚 Documentation – Installation manuals, API 670 guides, calibration procedures
- 🔧 Commissioning Support – Remote assistance for initial setup and calibration
- 🔄 30-Day Returns – Unused monitors in original packaging
FAQ
Q: What sensors are compatible with this monitor?
A: Compatible with Bently Nevada proximity probes, accelerometers, and velocity sensors. Verify sensor specifications before connection.
Q: How often should I recalibrate the monitor?
A: API 670 recommends annual calibration verification. Full recalibration every 3-5 years or after sensor replacement.
Q: Can I use this monitor in hazardous areas?
A: Monitor must be installed in non-hazardous area. For hazardous locations, use intrinsically safe (IS) rated barriers.
Product Description
Bently Nevada 19000-00-90-12-02 Vibration Monitor
The Bently Nevada 19000-00-90-12-02 is a precision vibration monitoring system designed for continuous machinery health surveillance in turbines, compressors, motors, and generators. This industrial-grade monitor provides real-time vibration analysis with programmable alarms, preventing catastrophic failures and extending equipment life in power generation, oil & gas, and manufacturing facilities.
Key Features
- ✅ Real-Time Monitoring – Continuous vibration surveillance for critical machinery
- ✅ Programmable Alarms – Configurable alert and danger setpoints for machinery protection
- ✅ 4-20mA Output – Industry-standard analog output for DCS/PLC integration
- ✅ Wide Frequency Range – Captures low-frequency and high-frequency vibration events
- ✅ API 670 Compliant – Meets machinery protection system standards
- ✅ Relay Outputs – Alarm contacts for machinery shutdown systems
Technical Specifications
| Part Number | 19000-00-90-12-02 |
| Product Type | Vibration Monitor |
| Input Type | Proximity probes, accelerometers, velocity sensors |
| Output Signal | 4-20mA (isolated) |
| Alarm Relays | 2 per channel (Alert, Danger) |
| Power Supply | 24V DC (18-30V range) |
| Operating Temp | -30°C to +65°C |
| Mounting | DIN rail or panel mount |
| Certifications | API 670, CE, UL, CSA |
| Weight | 0.2 kg |
Industrial Applications
Steam & Gas Turbines
Monitor bearing vibration in power generation turbines. Programmable alarms enable early detection of unbalance, misalignment, and bearing wear.
Compressor Trains
Track vibration in centrifugal compressors. API 670 compliance ensures machinery protection system certification for oil & gas facilities.
Large Motors & Generators
Measure vibration in electric motors above 1,000 HP. Early fault detection prevents catastrophic bearing failures and rotor damage.
Pumps & Fans
Monitor vibration in critical process pumps and induced draft fans. Reduce unplanned maintenance and extend equipment life.
Installation & Configuration
Mounting Options
- DIN Rail Mount – Snap module onto standard 35mm DIN rail in control cabinet
- Panel Mount – Use mounting brackets for direct panel installation
Configuration Steps
- Connect proximity probes or accelerometers to input terminals
- Set measurement range using DIP switches or software configuration
- Program alarm setpoints (Alert and Danger levels)
- Connect 4-20mA output to DCS/PLC analog input
- Wire relay contacts to machinery shutdown system
- Apply 24V DC power and verify LED indicators
- Calibrate using known vibration source or signal generator
Authenticity Guarantee
⚠️ Counterfeit Monitor Risks
Non-genuine vibration monitors can cause:
- ❌ Inaccurate vibration readings leading to missed faults
- ❌ False alarms causing unnecessary shutdowns
- ❌ Non-compliance with API 670 standards
- ❌ Voided machinery protection system certifications
✅ Industrial Control Hub Guarantee
- 🔒 100% Genuine Bently Nevada – Factory-sealed packaging
- 📜 Full Traceability – Serial numbers and certificates
- 🌍 Authorized Distributor – Verify at Baker Hughes partner portal
- 🛡️ 24-Month Warranty – Manufacturer warranty honored globally
Package Contents
- 1× Bently Nevada 19000-00-90-12-02 vibration monitor
- Installation manual and configuration guide
- Mounting hardware (DIN rail clips or panel brackets)
- Terminal block connectors
Technical Support
- 📧 Application Engineering – Email us for sensor selection and alarm setpoint recommendations
- 📚 Documentation – Installation manuals, API 670 guides, calibration procedures
- 🔧 Commissioning Support – Remote assistance for initial setup and calibration
- 🔄 30-Day Returns – Unused monitors in original packaging
FAQ
Q: What sensors are compatible with this monitor?
A: Compatible with Bently Nevada proximity probes, accelerometers, and velocity sensors. Verify sensor specifications before connection.
Q: How often should I recalibrate the monitor?
A: API 670 recommends annual calibration verification. Full recalibration every 3-5 years or after sensor replacement.
Q: Can I use this monitor in hazardous areas?
A: Monitor must be installed in non-hazardous area. For hazardous locations, use intrinsically safe (IS) rated barriers.