Product Description
General Information
|
Manufacturer |
BACHMANN |
|---|---|
|
Model/Part Number |
MC212 |
|
Series |
MC200 |
|
Description |
Compact, high-performance industrial controller with dual-core processor, part of Bachmann’s modular automation platform. |
Processor & Memory Specifications
|
Processor Type |
Intel Atom (x86 architecture) |
|---|---|
|
CPU |
Industrial low voltage |
|
Clock Frequency |
1300 MHz |
|
Processor Cores |
2 |
|
Multitasking |
Yes |
|
Realtime SMP / Core Reservation |
Yes / Yes |
|
Working Memory |
2 GB DDR4 |
|
RAMDisk |
Yes |
|
Retentive Memory |
512 kB NVRAM |
|
Mass Storage (Integrated) |
2 GB pSLC Flash (16 MB used by system at shipping) |
|
Mass Storage (Removable) |
CFast Type I (not included by default) |
|
Maximum Tested Storage Capacity |
256 GB (theoretical up to 1.7 TB) |
Interfaces & Connectivity
|
Backplane Interface |
Bachmann M200 |
|---|---|
|
Process Image Controller |
Integrated |
|
Ethernet |
2x 10/100/1000 Base-T (RJ45) with AutoNegotiation, AutoCrossing, IEEE 1588 |
|
Serial Interface |
1x RS232/RS422/RS485 (D-SUB-9 male) |
|
USB |
1x USB 3.0 (Type-A female) |
|
Status LEDs |
3x CPU status (RUN / INIT / ERR), 2x per Ethernet port (status/speed) |
|
Rotary Switches |
2x 16-position hex-switches |
Programming & Monitoring
|
Programming Support |
IEC 61131-3, C/C++, MATLAB®/Simulink® (license required) |
|---|---|
|
Generic Build Target |
Yes |
|
Function Modules |
Supported (e.g., Motion Control, Camming, CNC) |
|
Monitoring Features |
CPU temp/load, network load, runtime behavior (cycle/watchdog), memory protection, power supply status |
Subsystems & Features
|
Real-time Clock |
Yes (battery-backed RTC) |
|---|---|
|
Time Sync |
IEEE 1588, SNTP |
|
Trusted Platform Module |
TPM 2.0 |
Power & Environmental
|
Power Supply |
+5 V DC via M200 backplane |
|---|---|
|
Nominal Power Consumption |
11.1 W (+5 V / 2220 mA) |
|
Reverse Polarity Protection |
Yes (with NT255) |
|
Voltage Interruption Immunity |
PS2 (IEC 61131-2, with NT255) |
Environmental Conditions
|
Operating Temperature |
-30 °C to +60 °C (fanless) |
|---|---|
|
Storage Temperature |
-40 °C to +85 °C |
|
Relative Humidity (Op.) |
5% to 95% (non-condensing or with condensation) |
|
Installation Altitude |
2000 m standard (derated up to 4500 m) |
|
Pollution Degree |
2 (IEC 60664-1) |
Compliance & Approvals
|
Safety Approvals |
CE, UKCA, cULus |
|---|---|
|
Maritime Approvals |
ABS, BV, DNV, KR, LR, NK, RINA |
Mechanical & Mounting
|
Module Width × Height × Depth |
110 mm × 119 mm × 61 mm |
|---|---|
|
Number of Slots / Units |
2 |
|
Weight |
Approx. 500 g |
System Compatibility
|
Backplane Compatibility |
BS2xx, BS2xx/S, BS2xx/E |
|---|---|
|
Power Supply Required |
NT255 |
|
Operating System |
McOS (VxWorks 7), pre-installed |
|
Development Tools |
ToolChain V4.30+ (for SMP), M-Base V4.39+ |