| Input Channels |
8 single-ended analog inputs (common return) |
| Input Types |
- Voltage: 0_10 V DC, ±10 V DC - Current: 4_20 mA, 0_20 mA (jumper selectable per channel) |
| Resolution |
12-bit (2.44 mV or 5 µA per LSB) |
| Accuracy |
±0.25% of full scale at 25°C; ±0.5% over full temperature range |
| Update Rate |
15 ms for all 8 channels (improved from 20 ms in prior revisions) |
| Input Impedance |
>200 kΩ (voltage mode), 250 Ω ±0.1% (current mode) |
| Loop Power |
External 24 V DC required for current loops |
| Open Wire Detection |
Yes _ < 3 mA (current mode) |
| Overrange |
±5% beyond nominal range; clamped |
| Isolation |
1500 V RMS field-to-backplane; no channel-to-channel isolation
|
| Common Mode Rejection |
>85 dB @ 50/60 Hz |
| Noise Rejection |
Enhanced digital low-pass filter (8_256 Hz configurable); 50/60 Hz notch |
| Scaling |
Configurable engineering units via Proficy Machine Edition (PME) |
| Diagnostics |
Open circuit, overrange, module fault, power supply monitoring
|
| Power Supply |
+5 V DC @ 140 mA (from backplane) |
| Power Consumption |
0.7 W maximum |
| LED Indicators |
Module OK (green), Fault (red), 8x Channel Active (green) |
| Configuration |
Via PME software; firmware-based field calibration (no trim pots) |
| Operating Temperature Range |
0°C to +60°C |
| Storage Temperature Range |
-40°C to +85°C |
| Humidity |
5% to 95% non-condensing |
| Vibration |
IEC 60068-2-6 (5g, 10_150 Hz) |
| Shock |
IEC 60068-2-27 (30g, 11 ms) |
| Mounting |
Snaps onto VersaMax carrier base (IC200ACCxxx) |
| Dimensions |
4.33" x 2.60" x 1.77" (110 mm x 66 mm x 45 mm) |
| Weight |
0.44 lb (0.20 kg) |
| Enclosure Rating |
IP20 |
| Revision B Enhancements |
Faster update rate, improved noise filtering, firmware calibration, enhanced EMC immunity |
| Standards Compliance |
IEC 61131-2, CE, UL, CSA, Class I Division 2, ATEX Zone 2, RoHS 2 |
