GE IC200ALG240-EB
GE IC200ALG240-EB
Manufacturer: General Electric
Product No.: IC200ALG240-EB
Condition:1000 tersedia
Product Type: 8-Channel Analog Input Module (Voltage/Current, Revision EB)
Product Origin: USA
Payment: T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months
- Dukungan 24/7
- Pengembalian 30 Hari
- Pengiriman Cepat
Product Details
| Parameter | Details |
|---|---|
| Manufacturer | General Electric |
| Model/Part Number | IC200ALG240-EB |
| Description | 8-Channel Analog Input Module (Voltage/Current, Revision EB) |
Product Overview
| Parameter | Details |
|---|---|
| Part Number | IC200ALG240-EB |
| Product Name | IC200ALG240 VersaMax 8-Channel Analog Input Module |
| Application | High-accuracy, multi-range analog signal acquisition in industrial automation, process control, and SCADA systems |
| Compatibility | GE VersaMax I/O system; mounts on any VersaMax carrier (IC200ACCxxx); supports CPU/NIU via backplane; compatible with PACSystems RX3i via Profinet |
| Function | Converts 8 isolated analog inputs (voltage or current) to 16-bit digital values; Revision EB includes enhanced diagnostics, HART pass-through, and firmware upgrade support |
Functional Specifications
| Parameter | Details |
|---|---|
| Input Channels | 8 differential, channel-to-channel and channel-to-ground isolated |
| Input Types | - Voltage: ±50 mV, ±150 mV, 0_10 V, ±10 V - Current: 4_20 mA, 0_20 mA (software/jumper selectable per channel) |
| Resolution | 16-bit (1.5 µA or 0.3 mV per LSB depending on range) |
| Accuracy | ±0.1% of full scale at 25°C; ±0.2% over full temperature range |
| Update Rate | 10 ms for all 8 channels (100 Hz sampling) |
| Input Impedance | >1 MΩ (voltage mode), 250 Ω ±0.1% (current mode) |
| Loop Power | External 24 V DC required for current loops; HART 7 compatible |
| HART Pass-Through | Yes _ full bidirectional HART 7 (device config, diagnostics, multivariable) _ new in Rev EB |
| Open Wire Detection | Yes _ <2 mA (current), <10% FSR (voltage); configurable upscale/downscale |
| Overrange/Underrange | ±5% beyond nominal range; configurable alarms |
| Isolation | 1500 V RMS field-to-backplane; 250 V RMS channel-to-channel |
| Common Mode Rejection | >110 dB @ 50/60 Hz |
| Noise Rejection | Configurable digital low-pass (8_1024 Hz); dual 50/60 Hz notch filters |
| Scaling & Linearization | User-defined units, square root, 32-point custom table |
| Diagnostics | Open circuit, over/underrange, HART status, loop resistance, module fault, self-test |
| Power Supply | +5 V DC @ 130 mA, +3.3 V DC @ 100 mA (from backplane) |
| Power Consumption | 0.98 W maximum |
| External Power | 24 V DC nominal (19.2_28.8 V) @ 100 mA for loop excitation (isolated) |
| LED Indicators | OK (green), Fault (red), 8x Channel Active (green), HART Comm (yellow, blinking) |
| Configuration | Proficy Machine Edition (PME) 9.0+; front micro-USB port for firmware/config |
| Firmware | Field-upgradable via USB or PME |
| Operating Temperature Range | 0°C to +60°C |
| Storage Temperature Range | -40°C to +85°C |
| Humidity | 5% to 95% non-condensing |
| Vibration | IEC 60068-2-6 (5g, 10_150 Hz) |
| Shock | IEC 60068-2-27 (30g, 11 ms) |
| Mounting | Snaps onto VersaMax carrier base (IC200ACCxxx) |
| Dimensions | 4.33" x 2.60" x 1.77" (110 mm x 66 mm x 45 mm) |
| Weight | 0.44 lb (0.20 kg) |
| Enclosure Rating | IP20 |
| Revision EB Enhancements | HART 7 pass-through, 16-bit resolution, faster update, micro-USB port, loop resistance monitoring, enhanced EMI immunity |
| Standards Compliance | IEC 61131-2, CE, UL, CSA, Class I Division 2, ATEX Zone 2, HART 7 Registered, RoHS 2, IEC 61000-6-2/4 (EMC) |
Product Description
Product Details
| Parameter | Details |
|---|---|
| Manufacturer | General Electric |
| Model/Part Number | IC200ALG240-EB |
| Description | 8-Channel Analog Input Module (Voltage/Current, Revision EB) |
Product Overview
| Parameter | Details |
|---|---|
| Part Number | IC200ALG240-EB |
| Product Name | IC200ALG240 VersaMax 8-Channel Analog Input Module |
| Application | High-accuracy, multi-range analog signal acquisition in industrial automation, process control, and SCADA systems |
| Compatibility | GE VersaMax I/O system; mounts on any VersaMax carrier (IC200ACCxxx); supports CPU/NIU via backplane; compatible with PACSystems RX3i via Profinet |
| Function | Converts 8 isolated analog inputs (voltage or current) to 16-bit digital values; Revision EB includes enhanced diagnostics, HART pass-through, and firmware upgrade support |
Functional Specifications
| Parameter | Details |
|---|---|
| Input Channels | 8 differential, channel-to-channel and channel-to-ground isolated |
| Input Types | - Voltage: ±50 mV, ±150 mV, 0_10 V, ±10 V - Current: 4_20 mA, 0_20 mA (software/jumper selectable per channel) |
| Resolution | 16-bit (1.5 µA or 0.3 mV per LSB depending on range) |
| Accuracy | ±0.1% of full scale at 25°C; ±0.2% over full temperature range |
| Update Rate | 10 ms for all 8 channels (100 Hz sampling) |
| Input Impedance | >1 MΩ (voltage mode), 250 Ω ±0.1% (current mode) |
| Loop Power | External 24 V DC required for current loops; HART 7 compatible |
| HART Pass-Through | Yes _ full bidirectional HART 7 (device config, diagnostics, multivariable) _ new in Rev EB |
| Open Wire Detection | Yes _ <2 mA (current), <10% FSR (voltage); configurable upscale/downscale |
| Overrange/Underrange | ±5% beyond nominal range; configurable alarms |
| Isolation | 1500 V RMS field-to-backplane; 250 V RMS channel-to-channel |
| Common Mode Rejection | >110 dB @ 50/60 Hz |
| Noise Rejection | Configurable digital low-pass (8_1024 Hz); dual 50/60 Hz notch filters |
| Scaling & Linearization | User-defined units, square root, 32-point custom table |
| Diagnostics | Open circuit, over/underrange, HART status, loop resistance, module fault, self-test |
| Power Supply | +5 V DC @ 130 mA, +3.3 V DC @ 100 mA (from backplane) |
| Power Consumption | 0.98 W maximum |
| External Power | 24 V DC nominal (19.2_28.8 V) @ 100 mA for loop excitation (isolated) |
| LED Indicators | OK (green), Fault (red), 8x Channel Active (green), HART Comm (yellow, blinking) |
| Configuration | Proficy Machine Edition (PME) 9.0+; front micro-USB port for firmware/config |
| Firmware | Field-upgradable via USB or PME |
| Operating Temperature Range | 0°C to +60°C |
| Storage Temperature Range | -40°C to +85°C |
| Humidity | 5% to 95% non-condensing |
| Vibration | IEC 60068-2-6 (5g, 10_150 Hz) |
| Shock | IEC 60068-2-27 (30g, 11 ms) |
| Mounting | Snaps onto VersaMax carrier base (IC200ACCxxx) |
| Dimensions | 4.33" x 2.60" x 1.77" (110 mm x 66 mm x 45 mm) |
| Weight | 0.44 lb (0.20 kg) |
| Enclosure Rating | IP20 |
| Revision EB Enhancements | HART 7 pass-through, 16-bit resolution, faster update, micro-USB port, loop resistance monitoring, enhanced EMI immunity |
| Standards Compliance | IEC 61131-2, CE, UL, CSA, Class I Division 2, ATEX Zone 2, HART 7 Registered, RoHS 2, IEC 61000-6-2/4 (EMC) |