| Input Voltage |
120/230 V AC (auto-ranging: 85–132 V / 170–264 V AC) |
| Input Frequency |
47 – 63 Hz |
| Input Current |
≤ 2.3 A @ 120 V, ≤ 1.2 A @ 230 V
|
| Inrush Current |
≤ 20 A (cold start) |
| Output Voltage |
24 V DC (adjustable 24.0 – 28.8 V via potentiometer) |
| Output Current |
5 A continuous; 6 A peak (for < 100 ms) |
| Output Power |
120 W |
| Efficiency |
≥ 87 % |
| Ripple / Noise |
≤ 50 mVpp (20 MHz bandwidth) |
| Hold-Up Time |
≥ 20 ms at full load |
| Overload Protection |
Electronic current limiting (auto-recovery) |
| Short-Circuit Protection |
Yes – continuous short-circuit proof |
| Parallel Operation |
Yes (up to 2 units, with load sharing) |
| Diagnostics |
Green LED (OK), Red LED (fault); relay contact (NO/NC) for remote monitoring |
| Operating Temperature |
0°C to +60°C (derating > 50°C: 2.5 %/K) |
| Storage Temperature |
−40°C to +85°C |
| Dimensions (W×H×D) |
25 mm × 125 mm × 120 mm |
| Weight |
0.35 kg (0.77 lbs) |
| Mounting |
SNAP-ON on S7-300 DIN rail (EN 60715) |
| Connectors |
Screw terminals (0.5–2.5 mm²) – L+, M, PE, input L/N, diagnostic relay
|
| Protection Rating |
IP20 |
| Certifications |
CE, UL 508, cULus, CSA, ATEX Zone 2, IECEx, FM Class I Div 2
|
| Standards Compliance |
IEC 61131-2, EN 61000-6-2/4 (EMC), EN 55011 Class B, UL 60950-1
|
